Media & materials
Chemical processing · Cryogenic service · Marine & offshore · Oil & gas · Petrochemical
Loading page…
- Connection type
- Raised face flanged
- Size range
- DN15–DN50
- Lead time
- Checking…
- Standard
- EN 1092-1
| Design standard | API 602 |
|---|---|
| Connection type | Raised face flanged |
| Connection standard | EN 1092-1 |
| Pressure system | PN |
| Pressure rating | PN100 |
| Body material | MONEL-400 |
| Available sizes | DN15 · DN20 · DN25 · DN32 · DN40 · DN50 |
| Available trims | Trim 1 · Trim 2 · Trim 3 · Trim 4 · Trim 5 · Trim 8 · Trim 9 · Trim 10 · Trim 11 · Trim 12 · Trim 13 · Trim 14 · Trim 15 · Trim 16 · Trim 17 · Trim 5A · Trim 8A |
Catalogue options. Operating limits depend on the selected size, materials and configuration.
Dimensions by nominal size
Compare EN 558-1 series.
Open a series tab to see its exact length and DN coverage. Select the same series when adding the valve to RFQ or generating documents.
SELECTED VARIANTEN 558-1 series 14
6 of 6 product sizes have an available length.
| DN | Face-to-face L (mm) | Availability |
|---|---|---|
| DN15 | 115 | Available |
| DN20 | 120 | Available |
| DN25 | 125 | Available |
| DN32 | 130 | Available |
| DN40 | 140 | Available |
| DN50 | 150 | Available |
| DN | Open-position height from flow centreline, H(open) (mm) | Handwheel diameter, W (mm) | Port bore diameter, Ød (mm) | Flange outside diameter, OD (mm) | Flange thickness, t (mm) | Raised-face height (mm) | Bolt-circle diameter, BC (mm) | Bolt holes (qty) | Bolt-hole diameter (mm) | RFQ product code |
|---|---|---|---|---|---|---|---|---|---|---|
| DN15 | 159 | 87 | 10.5 | 105 | 20 | 2 | 75 | 4 | 14 | FF602-GAT-D15-P100-RF-MN400-T1 |
| DN20 | 163 | 87 | 13 | 130 | 22 | 2 | 90 | 4 | 18 | FF602-GAT-D20-P100-RF-MN400-T1 |
| DN25 | 190 | 105 | 17 | 140 | 24 | 2 | 100 | 4 | 18 | FF602-GAT-D25-P100-RF-MN400-T1 |
| DN32 | 203 | 146 | 23 | 155 | 24 | 2 | 110 | 4 | 22 | FF602-GAT-D32-P100-RF-MN400-T1 |
| DN40 | 249 | 146 | 29 | 170 | 26 | 3 | 125 | 4 | 22 | FF602-GAT-D40-P100-RF-MN400-T1 |
| DN50 | 284 | 160 | 36 | 195 | 28 | 3 | 145 | 4 | 26 | FF602-GAT-D50-P100-RF-MN400-T1 |
About this product
MONEL-400 forged gate valve with raised face flanged ends, Trim 1 and PN100. Available nominal sizes: DN15, DN20, DN25, DN32, DN40, DN50. Download the product-range datasheet or select an exact size for RFQ and 3D.
Final material suitability, pressure-temperature limits, tests and document scope are confirmed with the quotation.
For technical documentation or assistance with your selection, contact FerraForge.
Pressure & temperature
PN100 is the catalogue pressure designation. Final allowable limits depend on material and operating temperature.
Documentation
State the required testing, EN 10204 certificate scope and project documentation with the enquiry.
Detailed internal construction
- Trim
- Trim 1
- Seat surface
- AISI 410 stainless steel (13Cr)
- Wedge surface
- AISI 410 stainless steel (13Cr)
- Stem
- AISI 410 stainless steel (13Cr)
- Backseat
- AISI 410 stainless steel (13Cr)
Same construction, another rating.
Raised face flangedMONEL-400 forged raised face flanged gate valve
View product →
MONEL-400 forged raised face flanged gate valve
PN10
View product →Raised face flangedMONEL-400 forged raised face flanged gate valve
View product →
MONEL-400 forged raised face flanged gate valve
PN16
View product →Raised face flangedMONEL-400 forged raised face flanged gate valve
View product →
MONEL-400 forged raised face flanged gate valve
PN25
View product →Raised face flangedMONEL-400 forged raised face flanged gate valve
View product →